Hot dip galvanized steel street light pole
♦ Light pole was designed by anti-seismic 7 degrees & anti-wind 12 level & anti-seismic intensity is B level.
♦ According to the design requirements,the light pole material is made of high quality low carbon steel Q235,and the silicon content of stee isnot higher than 0.04%.Bending forming by a large bending machine,straigtness error is not more than 0.05%.
♦ Manufacturing technology:The light pole is formed integrally with smooth line,treated with internal and external hot galvanizing.The process of galvanizing is acid washing,hot galvanizing,washing,passivation and so on.Conforms to the national standard GB/T13912-92.Zinc plating adhesion,conforms to the standard GB2694-88 request,the anticorrosion life is more than 30 years.
Economic Cast Iron Galvanized Solar Lamp Poles are a type of outdoor lighting fixture designed to provide illumination through solar power. These lamp poles are made from cast iron, which is a strong and durable material that can withstand harsh weather conditions. They are coated with a galvanized finish, which helps to prevent rust and corrosion.
The lamp poles are equipped with solar panels that absorb sunlight during the day and convert it into electrical energy. This energy is stored in batteries that are housed within the lamp pole. At night, the batteries power LED lights that provide illumination for outdoor areas such as streets, parks, and gardens.
These solar lamp poles are an ideal choice for areas that do not have access to electricity or where installing electrical wiring is not feasible. They are environmentally friendly, as they do not require electricity from the grid and do not produce any harmful emissions. Additionally, they are easy to install and require minimal maintenance, making them a cost-effective lighting solution in the long run.
| Height | Spec. | Carton size | Volume m² | G.W(KGS) | |||
| Ø76 equal diameter rod | 3m | Bottom plate: 200*200*T8, light pole thickness: 1.5, 1 main pole + 1 middle pole + 1 top pole, both: 1 meter, the main body is sprayed with outdoor white plastic powder | Length：cm120 | Width：cm 25 | Height：cm 25 | 0.075 | 11.9 |
| 4m | Bottom plate: 200*200*T8, light pole thickness: 1.5, 1 main pole + 2 middle poles + 1 top pole, both: 1 meter, the main body is sprayed with outdoor white plastic powder | Length：cm 120 | Width：cm 25 | Height：cm 25 | 0.075 | 13.4 | |
| Ø114 set Ø76 rod | 3m | Bottom plate: 200*200*T8, lamp pole Ø114*2 Ø76*1.5, 1 main pole + 1 middle pole + 1 top pole, both: 1 meter, bottom pole sprayed with royal blue, top pole sprayed with white plastic powder , | Length：cm 120 | Width：cm 25 | Height：cm 25 | 0.075 | 12 |
| 4m | Bottom plate: 200*200*T10, light pole Ø114*2 Ø76*1.5, 1 main pole + 2 middle poles + 1 top pole, both: 1 meter, bottom pole sprayed with royal blue, top pole sprayed with white plastic powder , With decorative parts | Length：cm 120 | Width：cm 25 | Height：cm 25 | 0.075 | 13.5 | |
| 5m | Bottom plate: 200*200*T10, lamp pole Ø114*2 Ø76*1.5, 1 main pole + 2 middle poles + 1 top pole, 2 1.33 meters, 2 1.2m bottom poles painted with royal blue, top rod spray , White plastic powder, with decorative parts | Length：cm 150 | Width：cm 25 | Height：cm 25 | 0.93 | 18 | |
| 6m | Bottom plate: 220*220*T10, lamp pole Ø114*2 Ø76*2.0, 1 main pole + 2 middle poles + 1 top pole, 2 1.33 meters, 2 1.2 meters bottom poles painted in royal blue, top rod spray , White plastic powder, with decorative parts | Length：cm 150 | Width：cm 27 | Height：cm | |||
before manufacture ,we make CAD drawing
We offer smart light pole
Production Line
Project Cases
Test Equipment
Our Service
We will provide more precisely and efficiently manufacture and serve according to clients' drawings.
We have professional QC team to ensure your product more better.
Check the raw material before starting production.
Have the random inspection during the processing.
Make the 100% inspection before the shipments.
Our Advantages
● Factory sales directly with nice price, rofessional produce equipment, Testing Equipment, R&D team and nearly 15 production lines.
● We provide the completed service including design, engineering, manufacturing and production.
● From the raw material to packing, every products will going to 4 checks to ensure product... defect rate less than 3‰ .
All prototype products have to go through 4 checks in the whole process:
1. Raw material inspection
2. In processing inspection
3. Final inspection
4. Outgoing inspection
FAQ
Q1. Can I have a sample order for led light pole ?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: Sample needs 5-7 days, mass production time needs 1-2 weeks for order quantity more than
Q3. Do you have any MOQ limit for led light pole order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 4-6 working days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for led light?
A:
● Firstly, let us know your requirements or application.
● Secondly, We quote according to your requirements or our suggestions.
●Thirdly, customer confirms the samples and places deposit for formal order.
● Fourthly, We arrange the production.
Q6. Do you offer guarantee for the products?
A: Yes, we offer 1-3 years warranty to our products.
Q7. How to deal with the faulty?
A:
● Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
● Secondly,during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Economic Cast Iron Galvanized Solar Lamp Poles are a type of outdoor lighting fixture designed to provide illumination through solar power. These lamp poles are made from cast iron, which is a strong and durable material that can withstand harsh weather conditions. They are coated with a galvanized finish, which helps to prevent rust and corrosion.
The lamp poles are equipped with solar panels that absorb sunlight during the day and convert it into electrical energy. This energy is stored in batteries that are housed within the lamp pole. At night, the batteries power LED lights that provide illumination for outdoor areas such as streets, parks, and gardens.
These solar lamp poles are an ideal choice for areas that do not have access to electricity or where installing electrical wiring is not feasible. They are environmentally friendly, as they do not require electricity from the grid and do not produce any harmful emissions. Additionally, they are easy to install and require minimal maintenance, making them a cost-effective lighting solution in the long run.
| Height | Spec. | Carton size | Volume m² | G.W(KGS) | |||
| Ø76 equal diameter rod | 3m | Bottom plate: 200*200*T8, light pole thickness: 1.5, 1 main pole + 1 middle pole + 1 top pole, both: 1 meter, the main body is sprayed with outdoor white plastic powder | Length：cm120 | Width：cm 25 | Height：cm 25 | 0.075 | 11.9 |
| 4m | Bottom plate: 200*200*T8, light pole thickness: 1.5, 1 main pole + 2 middle poles + 1 top pole, both: 1 meter, the main body is sprayed with outdoor white plastic powder | Length：cm 120 | Width：cm 25 | Height：cm 25 | 0.075 | 13.4 | |
| Ø114 set Ø76 rod | 3m | Bottom plate: 200*200*T8, lamp pole Ø114*2 Ø76*1.5, 1 main pole + 1 middle pole + 1 top pole, both: 1 meter, bottom pole sprayed with royal blue, top pole sprayed with white plastic powder , | Length：cm 120 | Width：cm 25 | Height：cm 25 | 0.075 | 12 |
| 4m | Bottom plate: 200*200*T10, light pole Ø114*2 Ø76*1.5, 1 main pole + 2 middle poles + 1 top pole, both: 1 meter, bottom pole sprayed with royal blue, top pole sprayed with white plastic powder , With decorative parts | Length：cm 120 | Width：cm 25 | Height：cm 25 | 0.075 | 13.5 | |
| 5m | Bottom plate: 200*200*T10, lamp pole Ø114*2 Ø76*1.5, 1 main pole + 2 middle poles + 1 top pole, 2 1.33 meters, 2 1.2m bottom poles painted with royal blue, top rod spray , White plastic powder, with decorative parts | Length：cm 150 | Width：cm 25 | Height：cm 25 | 0.93 | 18 | |
| 6m | Bottom plate: 220*220*T10, lamp pole Ø114*2 Ø76*2.0, 1 main pole + 2 middle poles + 1 top pole, 2 1.33 meters, 2 1.2 meters bottom poles painted in royal blue, top rod spray , White plastic powder, with decorative parts | Length：cm 150 | Width：cm 27 | Height：cm | |||
before manufacture ,we make CAD drawing
We offer smart light pole
Production Line
Project Cases
Test Equipment
Our Service
We will provide more precisely and efficiently manufacture and serve according to clients' drawings.
We have professional QC team to ensure your product more better.
Check the raw material before starting production.
Have the random inspection during the processing.
Make the 100% inspection before the shipments.
Our Advantages
● Factory sales directly with nice price, rofessional produce equipment, Testing Equipment, R&D team and nearly 15 production lines.
● We provide the completed service including design, engineering, manufacturing and production.
● From the raw material to packing, every products will going to 4 checks to ensure product... defect rate less than 3‰ .
All prototype products have to go through 4 checks in the whole process:
1. Raw material inspection
2. In processing inspection
3. Final inspection
4. Outgoing inspection
FAQ
Q1. Can I have a sample order for led light pole ?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A: Sample needs 5-7 days, mass production time needs 1-2 weeks for order quantity more than
Q3. Do you have any MOQ limit for led light pole order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 4-6 working days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order for led light?
A:
● Firstly, let us know your requirements or application.
● Secondly, We quote according to your requirements or our suggestions.
●Thirdly, customer confirms the samples and places deposit for formal order.
● Fourthly, We arrange the production.
Q6. Do you offer guarantee for the products?
A: Yes, we offer 1-3 years warranty to our products.
Q7. How to deal with the faulty?
A:
● Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
● Secondly,during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
